? semiconductor components industries, llc, 2002 october, 2002 ? rev. 01o 1 case outline number: 485m ? row, staggered ? pad case 513al ? 01 issue o date 20 oct 2009 c 0.15 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters 3. coplanarity applies to the exposed pad as well as the terminals. a d e b c 0.08 a1 a d2 l c 0.15 2x 2x seating c 0.10 c e2 140x e b1 b17 a20 a39 b33 b49 a58 b 140x a 0.10 b c 0.05 c dim min max millimeters a 0.50 0.60 a1 --- 0.05 b 0.25 0.35 d 10.00 bsc d2 5.70 5.90 e 10.00 bsc e2 5.70 5.90 e 0.50 bsc xxxxx = device code a = assembly site wl = wafer lot yy = year ww = work week g = pb ? free package xxxxxxxxx xxxxxxxxx awlyywwg l 0.25 0.35 scale 1:1 generic marking diagram pin one location plane note 3 top view side view bottom view detail a 140x l a39 b33 140x b e e e/2 dimension: millimeters 10.10 0.50 pitch 40x 0.48 100x 0.35 40x 0.48 0.25 100x 0.35 10.10 5.95 5.95 a1 0.50 pitch *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* recommended a1 a76 b64 a 0.15 b c a 0.15 b c e/2 detail a mechanical case outline package dimensions http://onsemi.com 1 ? semiconductor components industries, llc, 2002 october, 2002 ? rev. 0 case outline number: xxx document number: status: new standard: description: 98aon42332e on semiconductor standard tllga140, 10x10, 0.5p electronic versions are uncontrolled except when accessed directly from the document repository. printed versions are uncontrolled except when stamped ?controlled copy? in red. page 1 of 2
document number: 98aon42332e page 2 of 2 issue revision date o released for production. req. by b. jensen. 20 oct 2009 ? semiconductor components industries, llc, 2009 october, 2009 ? rev. 01o case outline number: 513al on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
|